Remove door window trim evom3/25/2023 ![]() Once it is started it will walk its way off the door frame. Some people I have heard use a bottle opener on the edge of the trim. This trim is just crimped around the door frame. It is held onto the B pillar with 2 clips that are inside this piece.Īs for the door trim remove the glass and vent window. Then all you have to do is roll this trrim piece towards the quarter window opening. Remove them and pull out the window guide channel. Now for the up right piece again look for the three small philips head screws in the front channel. Once all the screws are out this trim piece just pulls down. Once the felt channel is out again look up and find the 2 or 3 screws that hold that trim piece in place. If you don't have the sail panels out some times you can wiggle the felt channel to get the buttom to pop loose. If you have your interior sail panels out of the car you can feel this small button in the channel the felt is in from behind the sail panel. Once this channel is loose there is a steel button that will hold the bottom portion of the channel in place. Once all the philips screws are out and that bolt is out start at the top and start to remove this felt channel. It hooks to the upper window felt channel. ![]() On the inner panel of the quarter you will also find a bolt that has to come out. ![]() Next look up from the outside in the upper window track you will find some philips head screws most likely 2 up top and 2 on the longer portion of the top trim piece. Remove this clip slide quarter window down out of front track and remove the quarter window out of the top. Roll the quarter window down half way until you see the back of the quarter window pivot point in the opening. First take your inside interior panel off.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |